Print Page   |   Sign In
Community Search
News & Press: ABMA Headlines

Registration Open for First Three 2015 ABMA Webinars

Wednesday, February 11, 2015   (0 Comments)
Posted by: Peter Shapiro
Share |

Registration has been opened for the first three webinars in the 2015 ABMA Webinar Series:

Title: Bearing Fatigue Life and Industry Standards

Date: March 18, 2015

Time: 1:00 – 2:00 pm ET

Abstract
This webinar provides an introduction to bearing fatigue life calculation as set forth in industry standards. The presentation will offer an overview of the relevant industry standards, explain fatigue failure mechanisms and define concepts such as dynamic equivalent load, dynamic load rating and fatigue limit that are essential to understanding fatigue life calculations. We will also review the basic life and modified life calculation methods described in ISO 281:2007. This webinar provides the basic foundation for understanding and performing bearing fatigue life calculations.

Learning Objectives

Participants completing this webinar will be able to:

  • Identify industry standards that govern bearing fatigue life calculation and related load ratings
  • Understand the basic differences between the various fatigue life calculation methods explained in the industry standards
  • Understand how dynamic load rating is used in fatigue life calculation and potential issues arising from use of this load rating for other purposes
  • Define important terminology used in fatigue life standards and the concepts they represent
  • Perform basic bearing fatigue life calculations

Presenter
Dave Sirrine, Manager of Application Engineering at NSK Corporation

Moderator
Bimal Nathwani, Engineering Manager at NSK Corporation

Click here to register. 

 




 

 

Title: Effect of Geometry on Roller Bearing Performance 

Date: April 14, 2015

Time: 1:00 – 2:00 pm EST

Presenter:

Rick Janssen, Design Staff Engineer, NTN Bearing Corporation

Moderator:

Jim Misch, Director of Industrial Engineering, NTN Bearing Corporation

This webinar will provide an introduction to roller and raceway contact geometry and their impact on bearing performance.

Click here to register. 




TitleWhat You Need To Know About Bearing Adjustment, Clearance and Setting

Date: May 14, 2015

Time: 1:00 – 2:00 pm EST 

Presenters:

Michael D. Allega – Specialist Application Engineer, The Timken Corporation

Jesse Yorty – Principal Application Engineer, The Timken Corporation

Moderator:

John M. Byers, Technical Development Manager, The Timken Corporation

This webinar will provide an introduction to the mounting of tapered roller bearings in end play or preload adjustment.

Click here to register. 



 


Click here for more information on 2015 ABMA Webinars.


Association Management Software Powered by YourMembership  ::  Legal